• Adhesive Properties and Biocompatibility of Dental Composites Reinforced with Cyanoacrylate and Resonance-stabilized Anions

  • Jin Ik Lim†

  • Department of Chemical Engineering, College of Engineering, Dankook University, Jukjeon-dong, Yongin-si, Gyeonggi-do 16890, Korea

  • 시아노아크릴레이트와 공명 안정화 음이온으로 구성된 치과용 복합재의 접착 특성과 생체 적합성

  • 임진익†

  • 단국대학교 화학공학과

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Yoshinaga, K.; Yoshihara, K.; Yoshida, Y. Development of New Diacrylate Monomers as Substitutes for Bis-GMA and UDMA. Dent. Mater. 2021, 37, e391-e398.
  •  
  • 2. Floyd, C. J. E.; Dickens, S. H. Network Structure of Bis-GMA- and UDMA-based Resin Systems. Dent. Mater. 2006, 22, 1143-1149.
  •  
  • 3. Zhou, Q.; Lin, J.; Li, Q. Study of High-strength, Low-shrinkage Dental Resin Composites with Bifunctional Polysilsesquioxane. Dent. Mater. 2025, 41, 755-767.
  •  
  • 4. Yamamoto, T.; Ferracane, J. L.; Sakaguchi, R. L.; Swain, M. V. Calculation of Contraction Stresses in Dental Composites by Analysis of Crack Propagation in the Matrix Surrounding A Cavity. Dent. Mater. 2009, 25, 543-550.
  •  
  • 5. Barszczewska-Rybarek, I. M. Structure–property Relationships in Dimethacrylate Networks Based on Bis-GMA, UDMA and TEGDMA. Dent. Mater. 2009, 25, 1082-1089.
  •  
  • 6. Lin, C. H.; Lin, Y. M.; Lai, Y. L.; Lee, S. Y. Mechanical Properties, Accuracy, and Cytotoxicity of UV-polymerized 3D Printing Resins Composed of Bis-EMA, UDMA, and TEGDMA. J. Prosthet. Dent. 2020, 123, 349-354.
  •  
  • 7. Ansari, S.; Moshaverinia, M.; Roohpour, N.; Chee, W. W. L.; Schricker, S.R.; Moshaverinia, A. Properties of a Proline-containing Glass Ionomer Dental Cement. J. Prosthet. Dent. 2013, 110, 408-413.
  •  
  • 8. McKenzie, M. A.; Linden, R. W. A.; Nicholson, J. W. The Physical Properties of Conventional and Resin-modified Glass-ionomer Dental Cements Stored in Saliva, Proprietary Acidic Beverages, Saline and Water. Biomater. 2003, 24, 4063-4069.
  •  
  • 9. Wang, X.; Huyang, G.; Palagummi, S. V.; Liu, X.; Skrtic, D.; Beauchamp, C.; Bowen, R.; Sun, J. High Performance Dental Resin Composites with Hydrolytically Stable Monomers. Dent. Mater. 2018, 34, 228-237.
  •  
  • 10. Cebe, M. A.; Cebe, F.; Cengiz, M. F.; Cetin, A. R.; Arpag, O. F.; Ozturk, B. Elution of Monomer from Different Bulk Fill Dental Composite Resins. Dent. Mater. 2015, 31, e141-e149.
  •  
  • 11. Dursun, E.; Nguyen, J. F.; Tang, M. L.; Attal, J. P.; Sadoun, M. HEMA Release and Degree of Conversion From a Resin-modified Glass Ionomer Cement after Various Delays of Light Activation. Dent. Mater. 2016, 32, 640-645.
  •  
  • 12. Abbasi, R.; Nodehi, A.; Atai, M. Synthesis of Poly(acrylic-co-itaconic acid) Through Precipitation Photopolymerization for Glass-ionomer Cements: Characterization and Properties of the Cements. Dent. Mater. 2020, 36, e169-e183.
  •  
  • 13. Swift, E. J.; Pawlus, M. A.; Vargas, M. A.; Fortin, D. Depth of Cure of Resin-modified Glass Ionomers. Dent. Mater. 1995, 11, 196-200.
  •  
  • 14. Lim, J. I.; Kim, J. H. Enhanced Biocompatibility and Adhesive Properties of Modified Allyl 2-cyanoacrylate-based Elastic Bio-glues. Colloids Surf., B 2015, 133, 19-23.
  •  
  • 15. Lim, J. I.; Lee, W. K. Enhanced Biocompatibility and Adhesive Properties by Aromatic Amino Acid-modified Allyl 2-cyanoacrylate-based Bio-glue. Colloids Surf., B 2014, 122, 669-673.
  •  
  • 16. Athavale, A.; Thao, M.; Sassaki, V. S.; Lewis, M.; Chandra, V.; Fukaya, E. Cyanoacrylate Glue Reactions: A Systematic Review, Cases, and Proposed Mechanisms. J. Vasc. Surg: Venous Lymphat. Disord. 2023, 11, 876-888.e1.
  •  
  • 17. Tomlinson, S. K.; Ghita, O. R.; Hooper, R. M.; Evans, K. E. Monomer Conversion and Hardness of Novel Dental Cements Based on Ethyl Cyanoacrylate. Dent. Mater. 2007, 23, 799-806.
  •  
  • 18. Lim, J. I.; Lim, K. J.; Lim, H. N.; Lee, Y. K. Bond Strength of Experimental Cyanoacrylate-Modified Dentalglass Ionomer Cements. J. Mater. Sci. 2010, 45, 5211-5217.
  •  
  • 19. Borie, E.; Rosas, E.; Kuramochi, G.; Etcheberry, S.; Olate, S.; Weber, B. Oral Applications of Cyanoacrylate Adhesives: A Literature Review Biomed. Res. Int. 2019, 17, 8217602.
  •  
  • 20. Wang, H.; Gao, H.; Yang, H.; Zhang, H.; Zhao, X. Synthesis and Evaluation of Ethyl α-cyanoacrylate-based Composites with Alkaline Solid Waste Additives as Initiators for Structural Repair. Constr. Build. Mater. 2026, 507, 145092.
  •  
  • 21. P, S.; Shivanand, H. K.; Debey, H. C.; Amjed, R.; R, M. Investigation on Mechanical Properties of Cyanoacrylate and Sodium Bicarbonate Reinforced Polymer Matrix Composite. Int. J. Innov. Sci. Eng. Technol. 2024, 11, 6-14.
  •  
  • 22. Fawzy, A. S.; El-Askary, F. S.; Amer, M. A. Effect of Surface Treatments on the Tensile Bond Strength of Repaired Water-aged Anterior Restorative Micro-fine Hybrid Resin Composite. J. Dent. 2008, 36, 969-976.
  •  
  • 23. International Organization for Standardization. Dental Materials - Testing of Bond Strength to Tooth Structure; ISO/TS 11405:2003; Geneva, Switzerland, 2003.
  •  
  • 24. de Souza Costa, C. A.; Hebling, J.; Garcia-Godoy, F.; Hanks, C. T. In Vitro Cytotoxicity of Five Glass-ionomer Cements. Biomater. 2003, 24, 3853-3858.
  •  
  • 25. Präbst, K., Engelhardt, H., Ringgeler, S., Hübner, H. Basic Colorimetric Proliferation Assays: MTT, WST, and Resazurin. In Cell Viability Assays; Gilbert, D., Friedrich, O., Eds.; Methods in Molecular Biology, Vol. 1601; Humana Press: New York, 2017, pp 1-17.
  •  
  • 26. García-Tamayo, M.; González-Martínez, J. G.; García-Huerta, M. A.; Campos-Jiménez, M.; Márquez-Rocha, M. L. Osteosynthesis with 2-octylcyanoacrylate and Sodium Bicarbonate in Zygomatic Arch Fractures: Animal Model Results. Rev. Med. Inst. Mex. Seguro Soc. 2011, 49, 605-610.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2025 Impact Factor : 1.0
  • Indexed in SCIE

This Article

  • 2026; 50(4): 581-587

    Published online Jul 25, 2026

  • 10.7317/pk.2026.50.4.581
  • Received on Mar 16, 2026
  • Revised on May 5, 2026
  • Accepted on May 18, 2026

Correspondence to

  • Jin Ik Lim

  • Department of Chemical Engineering, College of Engineering, Dankook University, Jukjeon-dong, Yongin-si, Gyeonggi-do 16890, Korea

  • E-mail: limjinik@dankook.ac.kr